| Author |
Thread: Audioque 2200D |
    
Bronze Member Username: Andrew16639
Miramar,
FL
United States
Post Number: 33
Registered: Sep-08
|
| Posted on Wednesday, October 22, 2008 - 11:00 am: |
|
How do you get the amp to push past 2200watts.
Specifications
Model AQ2200D
Digital Monoblock 1 ohm stable
Input Sensitivity 0.2v-8v
Variable Low Pass Filter 20Hz-200Hz @ 24dB/Oct
Subsonic Filter 10Hz-50Hz @ 24dB/Oct
Output Master / Input Slave, 2 amps linkable connection
Remote Level Control
Clipping Display Led
Signal to Noise Ratio 90dB
External Fuse Rating 200 Amps, 400 Amps Linked
Tested Voltage and THD 14.4V & 1% THD
4 ohm power 740 x 1
2 ohm power 1300 x 1
1 ohm power 2200 x 1
1 ohm Power @ 16V @ 1% THD 2500 x 1
1 ohm Power @ 16V @ 10% THD 3400 x 1
2 ohm Linked Power @ 14.4V @ 1% THD 4400 x 1
Dimensions 17.71"(L)x9.27"(W)x2.35"(H)
http://www.audioque.com/aq/AQamps2200D.htm |
|
Relevant Product Info
|
|
Gold Member Username: Bonhamd
Post Number: 1309
Registered: Nov-07
|
| Posted on Wednesday, October 22, 2008 - 11:09 am: |
|
it is rated at 2200 RMS
the only way you could get more power out of the amp is to drop it to a lower ohm load
this is only safe if you know what you are doing and have a good electrical system to back it up |
Gold Member Username: Nd4spd18
Philadelphia,
PA
Post Number: 8646
Registered: Jul-06
|
| Posted on Wednesday, October 22, 2008 - 11:37 am: |
|
Stop asking stupid questions...... the amps rated 2200w, its not gonna do more than that. duh |
Gold Member Username: Van_man
Boston South,
MA
Post Number: 4390
Registered: Mar-06
|
| Posted on Wednesday, October 22, 2008 - 04:49 pm: |
|
run it at 16 volts at 1/4 ohm. |
Gold Member Username: Nd4spd18
Philadelphia,
PA
Post Number: 8651
Registered: Jul-06
|
| Posted on Wednesday, October 22, 2008 - 09:05 pm: |
|
hahaha |
Bronze Member Username: Andrew16639
Miramar,
FL
United States
Post Number: 34
Registered: Sep-08
|
| Posted on Wednesday, October 22, 2008 - 10:14 pm: |
|
what is THD and how do you raise it. also how do you get or run 16 volts |
Gold Member Username: N2audio
Lawrence,
Ks
USA
Post Number: 1647
Registered: Mar-04
|
| Posted on Wednesday, October 22, 2008 - 10:40 pm: |
|
you want to raise THD huh??
GENIUS!
You run 16 volts by building a secondary electrical system for your car which is installed in addition to the standard 14v system.
FWIW (I'm guessing very little) with a 2200w amp it would take an additional 1000w or so, and a speaker that could make use of it, to produce a noticable improvement in output. |
Gold Member Username: Nd4spd18
Philadelphia,
PA
Post Number: 8654
Registered: Jul-06
|
| Posted on Wednesday, October 22, 2008 - 11:31 pm: |
|
haha this guy is a real genius.
First of all that amp won't run at 1/4 ohm.
Second lower THD is better not higher lol. |
Gold Member Username: Juliob
Santo Domingo
Dominican Re...
Post Number: 5521
Registered: Dec-05
|
| Posted on Sunday, October 26, 2008 - 12:35 pm: |
|
i think a 2.2K rms system is plenty loud for you and all of us, so stop sking stupid ways to blow your sh1t up |
|
|
